Product Overview
- Features: Easy-to-change cutting plates
- Cutting plates of powder metallurgical high-speed steel (HSS). Manufactured in the MIM process (Metal Injection Molding)
- Extremely high durability compared to traditional wire rope cutters
- Extremely soft shearing cut reliably prevents the wire rope from fanning out
- Tip: Can be operated with one hand of an average size up to a 5 mm Ø. Therefore optimally suited as shears in an emergency at sea.
- Bake/cut: Specially arched cutting edges
- Easy to replace cutting plates if worn
- Low effort required due to optimum cutting geometry
- 2 integrated press profiles for Bowden cable end caps and Bowden cable sheath end caps
- Cutting performance: Wire ropes up to 1800 N / mm² with max. Ø 6 mm (e.g. stainless steel wire ropes, wire ropes with steel and textile ropes
- Bowden cables, shrouds)
- Wire up to 750 N/mm² with max. 4 mm Ø (e.g. nails/wire pins, screws, bolts, ceiling hangers)
- Single and multicore copper and aluminium cables with max. 10 mm Ø
- Joint: Adjustable joint for precise cutting plate guidance
- Latch to prevent unwanted opening, thighs/handles: Version JC = with 2-component handles
- Material/Finish: Plier body hot drop-forged
- Chromed
Technical Specifications
| Net weight [kg] | 0.48 kg |
|---|---|
| Total length [mm] | 200 mm |
| Surface | chrome-plated |
| Cutting values | Medium hard wire: 4 mm / 6 AWG, Multi-wire cable: 6mm / 3AWG, Wire Rope Fiber: 6mm/3AWG |
| Hardness of cutting edge | 62 - 65 HRC |
