Product Overview
- The inner spring compressor enables the quick and safe removal and installation of suspension springs on transverse and trailing arm axles directly on the vehicle.
- The extremely stable and robust design ensures a very high safety level, and the unique three-point safety lock as well as the special corrugated profile prevent the pressure plates from rotating in relation to each other when the spring is compressed, thus preventing the spring from popping out. This makes the a installation of additional securing devices against falling out unnecessary!
- The pressure plates are also equipped with anti-slip protective inserts preventing the spring from turning out and the sensitive spring surface coating from being damaged.
- Advantages: • Particularly compact design
- • Removal and installation of suspension springs on transverse and trailing arm axles
- • Especially suitable for VAG vehicles with very small through hole in the wishbone
- • Loosening of various axle components and the resulting wheel alignment become superfluous
- • Very high time saving
- • Very safe clamping due to unique 3-point safety locking system
- • No additional safety devices against falling out necessary!
- • Special wave profile prevents the pressure plates from twisting in relation to each other
- • Protective inserts prevent damage to the sensitive spring surface coating
- • No moving of the spring while compressed due to anti-slip protective inserts
Technical Specifications
| Contents (Qty of pieces) | 4 |
|---|---|
| Net weight [kg] | 3.5 kg |
| Total length [mm] | 370 mm |
| Total width [mm] | 231 mm |
| Total height [mm] | 46 mm |
| Parts list (Text) | 1x KL-0033-100 A - clamping cylinder, 1x KL-0033-1101 - Pressure plate with lock, 1x KL-0033-1102 - Pressure plate with shaft profile, 1x IN 19 LK 8-140 - screwdriver insert, 1x KL-0033-1090-1 - foam insert |
| Target groups | Automotive |
| Clamping width (min.) | 116 mm |
| Clamping width (max.) | 216 mm |
| Suitable for | Universally suitable for chassis springs on wishbone and multi-link axles for VW-Audi, Seat, Porsche, Mercedes, BMW, Ford, and many more., Fits particularly to the rear axle on Audi, for example Audi A4 B8 (8K), A5 (8T), A6 (C7 / 4G), A7 (C7 / 4G), Q |
| Drive connector hexagon [metric] | 19 mm |
| Spring Ø, inner (min.) [mm] | 100 mm |
| Spring Ø, outer (max.) [mm] | 130 mm |
| Load (max.) [N] | 30.000 N |
| Distance to work | 100 mm |
| Breaking point | 120.000 N |
| Drive hexagon [mm] | 8 mm |
| Outer Ø, clamping cylinder [mm] | 34 mm |
