Product Overview
- In order to be able to pull stuck shock absorber units out of the steering knuckle clamping bore or suspension joints out of the lower suspension joint mounting without damage, it is absolutely necessary to widen the clamping bore properly with an expanding tool.
- The expansion tool set enables both the suspension strut clamping bore and the lower suspension joint mount on the front axle to be expanded professionally. Required, for example, when changing the spring, the shock absorber and the suspension joint.
- The floating bolts prevent the spreading tool from tilting, and the special spreading wedge with stop prevents the clamping bore from expanding too much.
- This prevents damage to the cast or aluminium steering knuckle housing or other chassis components as a consequence of unprofessional removal and installation attempts.
- Due to the variably adjustable spreader head, even vehicles with an off-centre clamping slot are no problem!
Technical Specifications
| Contents (Qty of pieces) | 8 |
|---|---|
| Net weight [kg] | 1.75 kg |
| OEM | 3424|31 2 230|T20040 |
| Total length [mm] | 238 mm |
| Total width [mm] | 188 mm |
| Total height [mm] | 74 mm |
| Parts list (Text) | 1x KL-0104-2100 A - Basic tool, 1x KL-0104-2121 A - Thrust screw with wedge no. 1 (a=5.5 mm, b=12.0 mm), 1x KL-0104-2122 A - Thrust screw with wedge no. 2 (a=2.0 mm, b=8.0 mm), 1x KL-0104-2124 - Thrust screw with wedge no. 4 (a=5.5 mm, b=9.5 mm), 1x |
| Target groups | Automotive, Construction and commercial vehicles |
| Suitable for | Fits spring strut clamping holes on e.g. Audi A3 (8P, 8V), Audi TT (8S); VW Arteon (3H), Crafter , Golf IV (1J), Golf V (1K), Golf VI (1K), Golf VII (AU), Passat (3C, 362, 365), T5 (7H, 7J), T6 (7H, 7J); BMW 2er (F45); Citroën; Fiat Panda (312); Ford |
| Storage | Case |
| Expanding dimension | a=5,5 mm, b=12,0 mm (wedge 1), a=2,0 mm, b=8,0 mm (wedge 2), a=5,5 mm, b=9,5 mm (wedge 4), a=12,5 mm, b=17,0 mm (wedge 5) |
