Product Overview
- For close-fitting ball bearings, rings, bushings and Simmerrings
- Titanium-nitrided surface
- M10 connecting thread
- Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extracted. The counter-support brace is then added. Both feet must be aligned parallel to the spindle to ensure rigidity
- In robust plastic case
- 275 x 229 x 83 mm
Technical Specifications
| Contents (Qty of pieces) | 5 |
|---|---|
| Width across flats [mm] | 11 + 13 mm |
| Net weight [kg] | 1.24 kg |
| Can be retrofitted with hydraulic spindle | No |
| Connecting thread | M10 |
| Type | with plastic case |
| Parts list (Text) | 1.34 / 1 internal extractors 5 - 8.5 mm 1.34 / 2 internal extractors 8 - 15 mm 1.34 / 3 internal extractors 15 - 25 mm 1.34 / 4 internal extractors 25 - 36 mm 1.35 / 0 slide hammer 230 mm, 200 g 134/099 plastic case with foam insert |
| Surface | titanium-nitride coated |
