Product Overview
- Depending on the application, access is possible from the front (e.g. open-end fitting) or side (e.g. reversible ratchet and socket).
- Force to be applied in the middle of the handgrip only - do not use an extension tube as otherwise, inaccuracies can evolve (except for model DXZ where the DREMOMETER has been calibrated and adjusted using the extension tube)
- Operation only with end fittings with standardised depth gauges, otherwise inaccuracies can arise. Keep the depth gauges on the certificate in mind. Only use original GEDORE accessories.
- Large drive cross-section transfers maximum torques
- Extremely low wear attributable to reduced forces in a lever mechanism
- Forged lever chain from our group own quality forge
- Maximum precision even when subjected to extreme continuous use
- Long life cycles and tool lives
- Easy operation - fast and safe torque tightening
- Easy adjustment thanks to attractive adjusting button secured against loss at the end of the handle
Technical Specifications
| Net weight [kg] | 3.5 kg |
|---|---|
| Total length [mm] | 846 mm |
| Total width [mm] | 45 mm |
| Total height [mm] | 35 mm |
| Material | Aluminium alloy |
| Width of head 1 [mm] | 45.0 mm |
| Target groups | Automotive, Industry, Construction and commercial vehicles, Military, Energy, Mechanical engineering, Workshop, Utilities, Service, Railway, Agriculture, Oil & Gas |
| Head height 1 [mm] | 35 mm |
| Range of application | Assembly, Series assembly, Production, Maintenance and repair |
| Torque (max.) [Nm] | 620 Nm |
| Drive type/drive | Drive pin |
| Torque (min.) [Nm] | 140 Nm |
| Torque (max.) [lbf·ft] | 450 lbf·ft |
| Precision +/- | +/- 3 % |
| Tightening direction | Left and right |
| Torque range (min./max.) [Nm] | 140 Nm - 620 Nm |
| Torque (min.) [lbf·ft] | 100 lbf·ft |
| Torque range (min./max.) [lbf·ft] | 100 lbf·ft - 450 lbf·ft |
| Trigger mechanism | Short path triggering |
| Test certificate | DIN EN ISO 6789-2:2017 |
| Backup | Locking pin |
| Depth gauge [metric] | 45.0 mm |
| Graduation [lbf·ft] | 10 lbf·ft |
| Scale division [Nm] | 10 Nm |
| Graduation | 10 |
| Torque wrench type | DZ |
| Distance between housing and centre of drive [mm]. | 18 mm |
| Calibration length | 767.5 mm |
| Lever length drive side [mm] | 49 mm |
| Lever length handle side [mm] | 597 mm |
| Receptacle width [mm] | 22 mm |
