Product Overview
- For testing, and verifying clockwise and anti-clockwise torque wrenches
- 5 models in the range 0,5 - 3150 Nm
- 5 models in the range from 0,5 to 3.150 N·m
- Electronic torque tester integrated with measurement electronics
- Robust housing from aluminium cast (except ETP 3150) with separate or detachable operating display
- Traceable to national standards
- No. ETP 15 with integrated overload protection and tool for manual resetting after unintended overload
- Torque reading precision +/- 1 %
- +/- 1 digit from reading figure
- Factory certificate based on VDI 2646
- Optional certificate as per DAkkS-DKD-R 3-8
- A large LC graphic display
- Wide measuring range in Nm, can be switched to cNm, lbf·ft or lbf·in (model dependant)
- Free evaluation PC software included
- Scope of delivery: Operating display, display holder incl. cable, software incl. connection cable for PC
Technical Specifications
| Net weight [kg] | 4.74 kg |
|---|---|
| Total length [mm] | 120 mm |
| Total width [mm] | 93 mm |
| Total height [mm] | 80 mm |
| Adaptor | - |
| Drive mount, square [metric] | 6.3 mm |
| Drive connector square [inch] | 1/4" |
| Torque (max.) [Nm] | 15 Nm |
| Torque (min.) [Nm] | 0.5 Nm |
| Torque (max.) [lbf·ft] | 11 lbf·ft |
| Measurement accuracy | ± 1% Toleranz vom Ablesewert, ± 1 Digit |
| Interface | RS-232 |
| Power source | Kabel |
| Chemical properties | Lithium |
| Type of battery | CR 1225 |
| UN number | UN 3091 |
| Torque range (min./max.) [Nm] | 0.5 Nm - 15 Nm |
| Torque (min.) [lbf·ft] | 0.4 lbf·ft |
| Torque range (min./max.) [lbf·ft] | 0.4 lbf·ft - 11 lbf·ft |
| Graphic display | Yes |
| Category at Take e Way | Rub. 271 Prim.Li. Knopfzelle |
| Resolution | 0.001 |
| Befestigung/Montage#153229 | 2x M6 - 8.8, has internal threads - no nuts required |
| Overload protection | Yes |
