Product Overview
- In conjunction with the various spring retainer pairs, the KL-9002-100 tensioning cylinder allows springs from MacPherson suspension strut or wishbone axles to be removed and installed easily and safely, space permitting.
- Spring retainers for spring diameters of 60 (inside) - 205 (outside) available.
- This is important when tensioning very short springs (2 - 3 spring coils) and in case of very long springs, in order to completely release or renew them.
- • The forged pressure plates are fixed with a bajonet lock system with automatic lock (tools, screws and screw rings are not needed).
- • The spindle drive stays closed, when the locking pin shears off.
- The compressed spring can then be released via an auxiliary drive, in order to install a new locking pin.
- • A spindle overload during the release process when the maximum operating stroke is reached, is prevented by an automatic free-wheel.
- Important to avoid damage to the spring compressor.
- • Due to a large pressure plate assortment, the spring compressor can be used on nearly all MacPherson suspension strut axles, damper strut axles and in part on some wishbone axles .
- Due to the interaction of high-precision individual components and the use of wear-resistant nitriding steel, the compressor cylinder works very smoothly and nearly without any wear.
- For example, tensioning of a Mercedes M-Class spring with a block force of approx. 18 000 N, only requires a driving force of 35 Nm.
- Advantages: • Simple handling regardless of large forces
- • Spring retainer attachment with automatic engagement
- • Adjustment of spanner sizes
- • Drive with additional auxiliary drive
- • Automatic free-wheel of the spindle
- • Can be also used for conical springs
Technical Specifications
| Net weight [kg] | 7 kg |
|---|---|
| OEM | VAS 6046|W 203 589 01 31 00|31 3 340 |
| Target groups | Automotive, Construction and commercial vehicles |
| Clamping width (min.) | 40 mm |
| Clamping width (max.) | 375 mm |
| Drive connector hexagon [metric] | 24 mm |
| Load (max.) [N] | 27.500 N |
| Distance to work | 305 mm |
| Breaking point | 110000 N |
