Product Overview
Stainless steel multifunction thread/pitch identification gauge. Easily identify the size of bolt, drill bit or tap that is required. Checks the thickness of washers and diameter of electric wire. Use as a set square, to measure angles 0-180° and as a ruler.
- Stainless steel metric multifunction thread/pitch identification gauge.
- Pitches: 3, 2.5, 2, 1.75, 1.5, 1.25, 1, 0.8, 0.7, 0.5mm.
- Bolt Screw Diameters: M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20.
- Wire Gauge: 0.8, 1, 1.2, 1.5, 2, 2.5mm.
- Square: 15°, 30°, 45°, 60°, 90°.
- Bolt Screw Length: 0-7cm.
- Tap/Drill Recommendation: M3-M20.
- Checks the thickness of washers and diameter of electric wire.
Technical Specifications
| Nett Weight | 137.5g |
|---|---|
| Bolt Screw Diameters | M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20 |
| Pitches | 3, 2.5, 2, 1.75, 1.5, 1.25, 1, 0.8, 0.7, 0.5mm (tpi) |
| Square | 15°, 30°, 45°, 60°, 90° |
| Tap/Drill Recommendation | M3-M20 |
| Wire Gauge | 0.8, 1.0, 1.2, 1.5, 2.0, 2.5mm |
Warranty Information
1 year-year guarantee (parts & labour), in addition to your statutory rights.
