Product Overview
- This unique special device allows a simple reduction of the overall suspension strut length by clamping together and thus favours a considerably faster removal and installation of McPherson suspension struts, especially on vehicle axles with strut clamping holes.
- Time-consuming operations such as loosening the cardan shaft, the axle guide, guide rod and tie rod joints as well as wheel alignment are completely eliminated.
- Advantages: • High time and cost savings
- • No need to loosen the axle guide
- • No need to loosen the cardan shaft
- • No need to loosen the tie rod end or the guide joint
- • No wheel alignment required
- • Can be used regardless of spring shape or spring pitch
- • All individual parts available as spare parts
Technical Specifications
| Contents (Qty of pieces) | 3 |
|---|---|
| Net weight [kg] | 2.9 kg |
| Total length [mm] | 500 mm |
| Total width [mm] | 420 mm |
| Total height [mm] | 175 mm |
| Parts list (Text) | 1x KL-0029-200 - Removal and installation tool for McPherson suspension struts, 1x KL-0029-1090-1 A - Foam insert, 1x KL-0029-2090 - Plastic case |
| Target groups | Automotive |
| Clamping width (min.) | 250 mm |
| Clamping width (max.) | 410 mm |
| Suitable for | Suitable for McPherson suspension struts in combination with the vehicle-specific supplementary kits. |
| Drive connector hexagon [metric] | 27 mm |
| Required accessories | KL-0029-1.. - Upgrade Kits |
| Storage | Case |
| Note | The removal and mounting aid must not be used for the disassembling of suspension struts. |
| Load (max.) [N] | 17.500 N |
| Distance to work | 160 mm |
