Product Overview
- The wheel bearing mounting tool enables a quick and secure installation of wheel hub bearing units (with and without locking ring) without damaging them.
- The special design of the tool ensures that during installation the applied press-in force only acts on the bearing outer ring and not on the wheel hub
- This prevents the bearing from being damaged.
- Without this tool kit, it is nearly impossible to professionally install the wheel hub bearing unit.
Technical Specifications
| Contents (Qty of pieces) | 10 |
|---|---|
| Net weight [kg] | 2.6 kg |
| Parts list (Text) | 1x KL-0041-4400 C - Clamping jaws 72 mm dia. 5x KL-0041-3931 - Thrust screw M14x1.5 1x KL-0039-1802 - Centring sleeve long 27.4 mm dia. 1x KL-0039-1265 - Thrust ring 65 mm dia. 1x KL-0039-1674 - Pressure / support sleeve short 74 mm dia. |
| Target groups | Automotive |
| Suitable for | Suitable for VW, Audi, Seat and Škoda with wheel bearing Ø 72 mm., Installed e.g. on the front axle of VW Polo IV (9N), Fox (5Z); Audi A2 (8Z0); Seat Ibiza III (6L1); Škoda Fabia I (6Y). |
| Required accessories | Hydraulic drive (17 t): KL-0040-2500 - Hydraulic cylinder 17 t KL-0215-35 M25 - Hydraulic pump KL-0039-2120 - Pull spindle with quick-clamping nut KL-0039-1002 - Mounting adapter KL-0039-1003 - Mounting adapter |
| Outside diameter [mm]. | 147 mm |
| Diameter milled slot of piston rod | 65 mm |
| Note | To remove the wheel hub bearing unit, the universal wheel hub puller KL-0041-380 ... is required. |
| Drive type | hydraulic |
| for outside Ø (bearing) [mm] | 72 mm |
