Product Overview
- This supplementary kit enables quick and professional removal of the bolted wheel bearing unit with wheel hub and brake disc on the front axle, as well as subsequent removal and insertion of the wheel hub on the wheel bearing unit, especially for closed wheel bearings without centre bore.
- For example, this is required when replacing the wheel bearing and brake discs, as these are located behind the wheel hub.
- All work can be carried out directly on the vehicle within a few minutes.
- Time-consuming removal and installation of the wheel bearing housing and subsequent wheel alignment are not necessary.
Technical Specifications
| Contents (Qty of pieces) | 12 |
|---|---|
| Net weight [kg] | 2.9 kg |
| Parts list (Text) | 1x KL-0040-8501 A - Thrust ring, 1x KL-0040-8621 - Thrust adapter, 5x KL-0039-1823-4 - Cylinder screw, M10 x 12 mm, 5x KL-0186-9000-3 - Cylinder screw, M10 x 75 mm |
| Target groups | Automotive, Construction and commercial vehicles |
| Suitable for | Fits with the front axle on Ford Transit V363 (as of YOM 2014) with rear-wheel drive and a hole circle diameter at the brake disc fixing screws of 97.5 mm and 111 mm. Particularly suitable for vehicles with wheel bearing units without centre bore in |
| Required accessories | KL-0174-371 - Perforated disc insert KL-0040-2812-1 - Spindle M24 KL-0040-2812-5 - Thrust nut KL-0040-2800 - Hydraulic cylinder 28 t KL-0215-35 M28 - Hydraulic pump |
| Wheel stud circles | 97,5 mm, 111 mm |
| Drive type | hydraulic |
