Product Overview
- For professional testing of brake fluid quality.
- The test is carried out using an electrolytic measuring method and indicates the water content % in the brake fluid.
- • Rapid analysis of brake fluids of classes DOT 3
- • Precise measurement of the water content in % using the electrolytic measuring method
- • High measuring range from 0.1% to 6.0% water content
- • Fast measurement result within 0.5 seconds
- • Simple and convenient one-handed operation
- • Automatic switch-off function after 5 minutes
- • Easy-to-read 2" LCD display with backlighting
- • Visual and audible alarm function depending on brake fluid quality
- • Flexible measuring probe 250 mm long
- • Measuring probe dust and water protected to IP67
- • Power supply with 9V battery (not included!)
- • Weight without battery 120g
Technical Specifications
| Total length [mm] | 450 mm |
|---|---|
| Target groups | Automotive, Construction and commercial vehicles, Agriculture |
| Suitable for | Can be used universally on cars, vans and motorbikes with conventional DOT 3, DOT 4 and DOT 5.1 glycol-based brake fluids. |
| Type of battery | 9V Block Batterie |
| Note | Restriction for Austria (§ 57a KFG): This device cannot be calibrated and therefore does not meet the requirements for test devices in accordance with the Testing and Assessment Centre Ordinance (PBStV, Annex 2a) for use as part of the periodic vehic |
| Length (cable) [mm] | 270 mm |
| Wire/cable diameter | 5.9 mm |
| Temperature range | -10 °C - +50 °C |
| Display size [inch] | 2.0 " |
| Measuring range water content (max.) [%] | 6 % |
| Measuring range water content (min.) [%] | 0.1 % |
