Product Overview
- The assembly trolley "MODULO 270 A" with its unique composition is the ideal, mobile workstation for fast, organised, and efficient repairs.
- Content / range of application: • Various drive parts such as hydraulic cylinder 17t KL-0040-2500, ring ratchet/open-end spanners, impact extractors 4.8 kg - KL-0049-31 as well as pull/thrust spindles (mechanical, hydraulic), quick-clamping nuts and adapters of the KL-0039-..series for driving the tool kits.
- • Articulated handle KL-4007-411 as well as power spanner/socket spanner sockets (SK / TX / XZN) for loosening and tightening of wheel bearing central screws.
- • Locking ring pliers KL-0192-5 for the disassembly and assembly of wheel bearing locking rings.
- • Wire brush for derusting and cleaning various components.
- • Wheel hub puller KL-0041-38.. as well as wheel bearing tool kits of the KL-0041-4.. Series for pressing out and in of wheel hubs and wheel bearing units, for example on VW
- Audi
- Seat
- Škoda and Ford
- Mazda
- Volvo.
- • Pullers of the KL-0174-.. Series for pulling standard wheel bearings as well as pressing out bonded and stuck cardan shafts.
- • Hooks KL-0049-360 A for pulling of wishbones from the suspension joint clamping hole.
- • Wheel bearing tool kits of the KL-0039-.. series for pressing out and in of nearly all standard wheel bearings and wheel hubs.
- • Silent block tool kits of the KL-0039-.. series for pressing out and in of silent blocks and joints bearings.
- • Pressing devices of the KL-0326-1.. series for pressing out and in support/guide joints; for example, on Mercedes and VW T4.
- • Pressing devices of the KL-0610-1.. series for pressing out and in silent blocks on rear axle trailing arms; for example, on Ford
- • Wheel bearing tool KL-2211-111.. for pulling stuck screwed wheel bearing units; for example, on Subaru.
- • Holding device KL-0115 for counterholding wheel hubs when loosening and tightening the wheel bearing central bolt.
- • Pullers of the KL-0042-9.. series for pulling stuck wheel bearing inner races on the wheel hub.
- • Clamping plier KL-0121-96.. to compress lug clamps and locking of stepless hose clips.
- • Forcing tool of the KL-0165-.. series for separating ball joint connections on steering and axle systems.
- • Eccentric spanner KL-0167-30 A for loosening and tightening inner tie bar joints or axial joints.
- • Disassembly fork KL-0190-12 to check bearing and joint connections on vehicle axes, and to disassemble various parts.
- • Tool for reforming stud bolt threads (wheel hub) and pulling in cardan shafts.
- • Beech multiplex worktop
- 30 mm thick, oiled
- • 2 fixed castors Ø 200 mm and 2 swivel castors Ø 125 mm with total brake
- • Automatic drawer retraction with single pull-out stop and central locking system
- • Side walls with Euro perforation 10 x 38 mm for attaching hooks and tools
Technical Specifications
| Contents (Qty of pieces) | 234 |
|---|---|
| Net weight [kg] | 275 kg |
| Total length [mm] | 1.200 mm |
| Total width [mm] | 635 mm |
| Total height [mm] | 985 mm |
| Material | Steel sheet |
| Target groups | Automotive |
| Suitable for | Universally applicable for repairs on wheel bearings, steering and axle systems on passenger cars and vans. |
| Colour | blue |
| Note | incl. hydraulic pump |
| Drawer type | full extension |
| Number of drawers | 4 |
| Load capacity kg | 750 kg |
| Static load carrying capacity [kg] | 1000 kg |
| Single pull-out stop | Yes |
