Product Overview
- Pliers in VDE design especially designed for the needs of electricians with the following functions: Cable cutter: for easy cutting of cables up to 5x2.5 mm² or Ø 12 mm
- Stripping blades: Stripping option for wires 1.5 mm² and 2.5 mm²
- Crimping profile: Crimping of ferrules
- Toothed gripping face: special holding capacity when pulling cables and wires during installations
- Angled plier tip: easy on the wrist and allows full view of the workpiece
- Space-saving in the pocket, only one tool is needed
Technical Specifications
| Net weight [kg] | 0.245 kg |
|---|---|
| 1000 V insulated | Yes |
| VDE certified | Yes |
| Total length [mm] | 200 mm |
| Material | Quenched and tempered steel |
| Surface | chrome-plated |
| Standard | similar to DIN ISO 5745, EN 60900/IEC60900 |
| Handle design | 2-component grips VDE insulated up to 1000 V. |
| Handle material | plastic |
| Handle available | Yes |
| Design non-sparking | No |
| Cutting values | Hard wire: 1,6 mm / 14 AWG, Medium hard wire: 3 mm / 9 AWG, Cu cable, multi wire cross section: 5x2.5 mm², Multi-wire cable Ø: 12 mm |
| Hardness of cutting edge | 61 - 63 HRC |
| with cutting edge | Yes |
